Linksys WET200 Business Wireless-G Ethernet Bridge

Linksys WET200 Business Wireless-G Ethernet Bridge

The Linksys WET200 Wireless Bridge seamlessly bridges separate Ethernet networks together wirelessly and is ideal for small businesses with offices and resources that are in different office suites of a building or a closely adjacent building. The WET200 is a Power over Ethernet (PoE) end device so it can be installed anywhere an Ethernet cable can be run if there is not ready access to a power outlet. PoE enables delivery of both data and power to the WET200. An AC adapter is also included if the device installation site has a power outlet nearby.

Highlights

• 5-port Wireless Bridge for securely connecting separate wired networks
• Standards-based POE (IEEE 802.3af) or External DC power provides flexible installation
• RangeBooster technology for up to twice the range, reduced dead spots, and up to 35% more throughput than standard 802.11g
• Advanced wireless security using Wi-Fi Protected Access™ (WPA2 Enterprise) with up to 256-bit AES encryption and support for WMM provides improved QoS over wireless connections for better video and voice performance.

Advanced security features include Wi-Fi Protected Access™ (WPA2 Enterprise) with up to 256-bit AES encryption using EAP (Extensible Authentication Protocol) giving small businesses the protection they need to communicate and transfer data securely. The integrated QoS features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business qualilty VoIP and video applications.

Additional support for VLANs, SNMP, Spanning Tree, and Port Mirroring make this an ideal solution for network administrators to incorporate into larger organizations.

RangeBooster technology is a compatible add-on to standard Wireless-G that increases wireless signal range up to two times and throughput by up to 35%. Unlike ordinary wireless technologies that are hampered by signal reflections, RangeBooster devices use smart antennas and embedded processors to detect and decode reflected signals to enhance and boost data throughput. This capability also helps to reduce or eliminate "dead spots" within the wireless coverage area as well.

Features

• 5 port 10/100 Base-T Ethernet Managed Switch, Autosensing half/full duplex & MDI/MDI-X
• Supports 802.11b and 802.11g wireless connection to Access Point
• Easy installation and configuration Web Interface
• Supports WEP, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT wireless encryption
• Supports 802.1X, EAP-TLS, PEAP authentication with Radius server
• SMA detachable Dipole antennas with 1x2 MIMO to increase coverage
• Supports Power over Ethernet (PoE) or external DC power
• Supports SNMP and intuitive Web-based interface
• Support 802.1Q and port-based VLAN on LAN switch - 1 VLAN bridged over wireless
• Support 802.1p, IP TOS, and DSCP based QoS on LAN switch, WMM on wireless Tx
• Support Rate Limiting on both wired switch and wireless interface
• Support Spanning Tree protocol, port mirroring, and MAC-based ACL
• 3 year limited warranty

Package Contents

• Wireless-G Business Ethernet Bridge
• 2 x SMA detachable Dipole antennas
• User Guide on CD-ROM
• Quick Installation Guide
• Ethernet Network Cable
• Power Adapter
• Product Stands
• Registration Card

• Model
  WET200-G5
• Standards
  IEEE802.11g,
  IEEE802.11b,
  IEEE802.3,
  IEEE802.3u,
  IEEE802.3af (Power Over Ethernet),
  802.1p (QoS priority),
  802.1Q (VLAN),
  802.1X (Security Authentication),
  802.11i - Ready (Security WPA2),
  802.11e - Ready (Wireless QoS)
• Ports
  5x 10/100 Base-T Ethernet,
  12 VDC Power
• Buttons
  Reset
• Cabling Type
  UTP CAT 5
• LEDs
  Power,
  POE,
  Wireless,
  Ethernet 1-5
• Operating System
  Linux
• Setup/Config
  Built in Web UI for Easy browser-based configuration (HTTP/HTTPS)
• Management
• SNMP Version
• SNMP Version 1, 2c, 3
• Web F/W upgrade
• Firmware Upgradable Through Web-Browser
• DHCP
• DHCP Client
• Operating Modes
  Wireless Client (Infrastructure or Ad-Hoc)
• Wireless
• Radio and Modulation Type:
• 802.11b/DSSS
• 802.11g/OFDM
• Operating Channels:
• 11 North America,
• 13 Most of Europe (ETSI and Japan)
• Antenna
• 2 x External Antena
• Omni-Directional
• SMA detachable
• 1.8 dBi Gain
• Transmit Power (Adjustable) @ Normal Temp Range:
• 11b: 15.5 ± 1 dBm
• 11g: 15 ± 1 dBm
• Receiver Sensitivity
• 11g: 54Mbps@ -72dBm,
• 11b: 11Mbps@ -85dBm
• Security
  WEP 64bit/128bit,
  WPA-PSK,
  WPA2-PSK,
  WPA-ENT,
  WPA2-ENT
  MAC-Based ACL between wired and wireless interfaces
  IEEE 802.1X support
• Quality of Service
  4 queues
  Queue mapping on ingress based on default priority, 802.1p tag, DSCP & IP ToS
  Rate limiting on both ingress and egress direction
  WMM priority settings for wireless egress
• General
  16 VLAN groups
  256 MAC address entries across wireless bridge
  1024 MAC address entries in the switch
• Environmental
• Dimensions
• 6.69" x 8.07" x 7.68" (170 x 205 x 195 mm)
• Weight
• 12.17 oz (345 g)
• Power
• 12V 0.5A DC input,
• IEEE802.3af Compliant PoE
• Max. power draw:
• 4.2 Watt
• Certification
• FCC, ICES-003, CE
• Operating Temp.
• 32ºF to 104ºF (0ºC to 40ºC)
• Storage Temp.
• -4ºF to 158ºF (-20ºC to 70ºC)
• Operating Humidity
• 10% to 85% Non-Condensing
• Storage Humidity
• 5% to 90% Non-Condensing
• Minimum Requirements
  PC or devices with Ethernet port
  802.11b or 802.11g Wireless Access Point
  Switch/Router with Power Over Ethernet (PoE) Support Or PoE Injector when used with POE
  Web-Based Configuration Java-Enabled Web Browser

Be the first to write a review!