Netgear WAG102 ProSafe Dual Band Wireless Access Point

Netgear WAG102 ProSafe Dual Band Wireless Access Point

Features

Universal 802.11a/b/g Wi-Fi access provides maximum WLAN performance in high-density, high interference deployments—as many as 128 simultaneous users
RF Management features automatically optimize the WLAN environment by continuously adjusting signal levels, selecting channels, and balancing the load among all access points
High-speed connectivity, up to 108 Mbps in turbo mode, on both bands.
Integrated IEEE 803.3af Power over Ethernet (PoE) and plenum rating maximize placement options
Comprehensive security with Wi-Fi Protected Access 2-Enterprise (WPA2-Enterprise) and 802.11i
Wireless Distribution System (WDS) supports bridging or repeater modes
2 detachable 5 dBi antennas (2.4 GHz and 5 GHz)
SNMP MIB I, MIB II and 802.11 MIB support
802.1x RADIUS support with EAP TLS, TTLS, PEAP
Secure Socket Layer (SSL) remote management login
Optimized for ProSafe Network Management Software NMS100
Compatible with NETGEAR ProSafe line of 2.4 GHz Antennas

Intelligent Networking Features for a Scalable, Secure Solution NETGEAR’s ProSafe Dual Band Wireless Access Point WAG102 delivers the secure, reliable, high performance wireless local area networks (WLANs) today's mobile workforce demands. The WAG102 Access Point supports both 5 GHz and 2.4 GHz 54 Mbps radio transmission with up to 108 Mbps in both 802.11g and 802.11a in turbo mode. It supports up to 128 simultaneous wireless clients and client types within the same coverage area. WAG102 brings standards-based enterprise-level functionality at a mid-market price with features such as robust security measures, simplified management and configuration, integrated IEEE 802.3af power over Ethernet (PoE), and Wi-Fi certification. Supports Simple Network Management Protocol (SNMP) and is optimized for NETGEAR ProSafe Network Management Software NMS100.

Secure
Complies with industry security standards for wireless data encryption, and user authorization. It provides support for WPA2 and 802.1x to enable strong mutual authentication to ensure only legitimate clients have access to the network. 802.11i, WPA2 Enterprise provides enhanced, interoperable wireless networking security. Supports MAC address authentication with 256-user Access Control Lists (ACL) and VPN pass-through.

Versatile
Cost effective, simple to install and use. Wi-Fi Certified and plenum rated—appropriate for placement above drop-down ceilings and under raised floors. Equipped with convenient Smart Wizard™ browser-based interface. Fitted with two powerful detachable 5 dBi antennas and compatible with NETGEAR’s ProSafe 2.4 GHz antennas for expanded wireless capacity and range. Protected with a NETGEAR 3-year warranty. WAG102 includes the embedded IEEE 802.3af Power over Ethernet (PoE) port which expands installation options by eliminating the need to locate the WAG102 near a power outlet.

Dynamic
WAG102 will be integrated with radio frequency (RF) management technology, where the wireless network self optimizes by intelligently choosing channels and dynamically adjusting the power levels to ensure coverage and avoid interference. This feature will be available as an update in a future release.

Technical Specifications

• Wireless
  Standard: IEEE 802.11a up to 108 Mbps; 802.11g up to 108 Mbps Wireless Access Point
  Antennas: Two (2) detachable antennas: (1) 5 dBi, 2.4 GHz and (1) 5 dBi 5 GHz
• Physical Interfaces
  LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support
  Power adapter: 12 VDC, 1.0A power supply; plug is localized to country of sale.
  Six (6) LEDs: Power, Test, 100 Mbps, Link/ACT, and WLAN 802.11g
  Antenna Connector: Two (2) reverse SMA antenna connectors
• Network Management
  Remote configuration and management through Web browser, SNMP
  SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB
• Advanced Wireless Features
  Point-to-point wireless bridge mode
  Point-to-multipoint wireless bridge mode
  Repeater mode
  Adjustable Transmit Power Control (TPC) from 100 mW down to 0 mW
  RF Management functionality including auto power transmission, channel selection (Future firmware upgrade)
• Typical Maximum Power Output
  802.11b mode, 1 to 11 Mbps 19 dBm
  802.11g mode, 6 to 24 Mbps 18 dBm
  802.11g mode, 36, 48 and 54 Mbps 17/16/16 dBm

Note: Maximum Tx varies based on country and/or region selection to ensure local regulatory compliance.

• Receive Sensitivity
  802.11b
  2 Mbps -94 dBm
  5.5 Mbps -92 dBm
  11 Mbps -90 dBm
  802.11g
  6 Mbps -91 dBm
  9 Mbps -91 dBm
  12 Mbps -90 dBm
  18 Mbps -87 dBm
  24 Mbps -85 dBm
  36 Mbps -80 dBm
  48 Mbps -75 dBm
  54 Mbps -70 dBm
  802.11a
  6 Mbps -92 dBm
  9 Mbps -91 dBm
  12 Mbps -90 dBm
  18 Mbps -86 dBm
  24 Mbps -84 dBm
  36 Mbps -79 dBm
  48 Mbps -72 dBm
  54 Mbps -70 dBm
• Power Over Ethernet Required
  4.3 W
• Security
  40/64-, 128-, and 152-bit WEP encryption
  Block SSID Broadcast
  VPN pass-through support
  MAC address filtering with access control lists – up to 256 users
  802.1x RADIUS support with EAP TLS, TTLS, PEAP
  Wi-Fi Protected Access (WPA2)
  Secure Socket Layer (SSL) remote management login
• Standards, Safety and Electromagnetic Conformance
  IEEE 802.11g (2.4 GHz Frequency Band, DSSS Modulation Type)
  IEEE 802.3af Power over Ethernet (PoE)
  FCC Part 15 Subpart B and Subpart C
  CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002), EN 301 489-1 V1.4.1 (2002), EN 300 328-1 (2001-12), EN 300 328-2 (2001-12), R&TTE Directive
  99/5/EC, CSIPR22(B), AS/NZS 3548 (B)
  Plenum Rated
  IEEE 802.11g (2.4 GHz Frequency Band, DSSS Modulation Type)
  IEEE 802.11a
  IEEE 802.3af Power over Ethernet (PoE)
  FCC Part 15 Subpart B , Subpart C and E
  C-Tick: AS/NZ 3548 Class B
  CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002-08), EN 301 489-1 V1.4.1 (2002-08), EN 300 328-1 (2001-12), EN 300 328-2 (2003--4), EN301893(5GHz),EN60601, R&TTE Directive 99/5/EC
• Physical Specifications
  Dimensions (H x W x D): 32 x 190.5 x 122 mm (1.25 x 7.5 x 4.8 in.)
  Weight: .62 kg (1.3 lb)
• Environmental Specifications
  Operating temperature: 0 to 40° C (32 to 104° F)
  Operating humidity: 90% maximum relative humidity, noncondensing
• System Requirements
  Windows® 98, Me, 2000 or XP
  2 MB of available disk space
• Warranty
  NETGEAR 3-year warranty
  
  
• Package Contents
  ProSafe Dual Band Wireless Access Point WAG102
  Two (2) 5 dBi Detachable Antennas
  Resource CD
  Power adapter
  Ethernet cable
  Installation guide
  Warranty/support information card

Be the first to write a review!