Ubiquiti Bullet M2 HP 2.4GHz Access Point/CPE

Ubiquiti Networks Bullet M2-HP (High Power) - 2.4Ghz - WIRELESS AP/CPE

100Mbps of REAL TCP/IP Throughput over outdoor multi-km links

With up to 300mW of power and enhanced receiver design, the Bullet M is ideal for long-distance links, capable of 100Mbps real TCP/IP speeds over multi-km distances

Ubiquiti Networks Bullet M5-HP Features

• Zero-Variable Wireless Infrastructure Deployment

• No radio card / host board issues

• No RF cable quality concerns

• No mechanical stability concerns

• No enclosure mounting requirements

• Just Plug and Go.

• Very Fast Deployments

• Samll Physical Size

• Signal Strength Indicator for Easy Line UP

• No power supply or POE injector included.

Please note that Ubiquiti supply the Bullet without a POE injector - (Please click here).

Features:

• High Performance 802.11a/N radio architecture
• Adjustable Channel support (5/10/20 MHz)
• Works with any suitable antenna
• Ubiquiti AirOS software
• External status LEDs
• Power over Ethernet

Specification:

• 25 dBm /- 2dB Atheros chipset
• MIPS 24KC, 400MHz
• 32MB SDRAM, 8MB Flash
• 1 x 10/100 Base-TX (Cat.5, RJ-45) Ethernet Interface
• FCC Part 15.247, IC RS210, CE
• Integrated N Male connector
• Maximum Power Consumption: 6 Watts
• Dimensions: 15.2 cm x 3.1 cm x 3.7 cm
• Weight: 0.18 kg
• Enclosure: Outdoor UV Stabilized Plastic
• Power Rating: upto 24V
• Max. Power Consumption: 7 Watts
• Power Method: Passive PoE (pairs 4,5 ; 7.8 return)
• Operating Temp: -40C to 80C
• Shock and Vibration: ETSI300-019-1.4
• RoHS Compliant: unknown

Additional information:

• Data Sheet (PDF)
• Manufacturer's Support Page with Firmware, Updates, FAQ, Documentation and Software Development Materials.

Warranty and Support Information:

• Standard 30 day return policy
• 1 year manufacturers limited warranty
• Official Online Forum: here
• Support is provided by the manufacturer. After checking the FAQ and online forums, if you still need help you can reach support in these ways:
  • email: support@ubnt.com
  • Phone: 1 408 942 1153
  • Skype: Ubiquiti_Support
  • All specifications are subject to change without notice.

Memory - 16MB SDRAM, 4MB Flash

Processor - Atheros SOC, MIPS 4KC, 180MHz

Networking - 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface

TX Power - 22 dBm

RX Sensitivity - -94 dBm

Antenna - None: Gasketised N Plug for external antenna

Power Supply - NOT INCLUDED - Requires up to 24v, 4 watt PSU

POE - NOT INCLUDED - Passive POE injector required

Operating Temperature - -20C to 70C

Operating Humidity - 5 to 95% Condensing

Weight - 180 gms

Size - 152 x 31 x 37 (LxHxW)

RoHS - Yes

Approvals - CE, FCC Part 15.247, IC RS210

Be the first to write a review!