Ubiquiti Bullet2HP 2.4GHz Access Point/CPE

Ubiquiti Networks Bullet 2HP (High Power) - 2.4Ghz - WIRELESS AP/CPE, OUTDOOR 802.11b/g

2.4 GHz Access Point/CPE which connects directly to an antenna. Power and data are supplied over the ethernet connection.

Ubiquiti Networks Bullet 2HP Features

• Zero-Variable Wireless Infrastructure Deployment
• No radio card / host board issues
• No RF cable quality concerns
• No mechanical stability concerns
• No enclosure mounting requirements
• Just Plug and Go.
• Very Fast Deployments
• Samll Physical Size
• Signal Strength Indicator for Easy Line UP

The N Plug contains a waterproof gasket, as does the end cap, but we strongly recommend that the N plug/antenna assembly be wrapped with self-amalgamating tape to prevent water ingress.

Please note that Ubiquiti supply the Bullet without a POE injector - (Please click here)

Memory - 16MB SDRAM, 4MB Flash

Processor - Atheros SOC, MIPS 4KC, 180MHz

Networking - 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface

TX Power - 29 dBm

RX Sensitivity - -94 dBm

Antenna - None: Gasketised N Plug for external antenna

Power Supply - NOT INCLUDED - Requires up to 24v, 4 watt PSU

POE - NOT INCLUDED - Passive POE injector required

Operating Temperature - -20C to 70C

Operating Humidity - 5 to 95% Condensing

Weight - 180 gms

Size - 152 x 31 x 37 (LxHxW)

RoHS - Yes

Approvals - CE, FCC Part 15.247, IC RS210

"Tiny, just fit the antenna."
Len (London)

Do you agree with these reviews? Why not write one yourself!